As an Amazon Associate I earn from qualifying purchases.
AURSINC #ad - The hotspot will also work mobile in your vehicle if you tether it to your mobile phone network. More product setup guide, 5R+, we will reply within 24 hours. Easy charging free micro usb charging cable included, charged with power bank or connect to laptop or computer.
Wifi ssid need the 2. 4ghz ssid as the pi zero w doesn't support 5. 8ghz. And wifi will not work with wep, make sure your WiFi Password Type is WPA. Firmware 4. 1. 5 in the latest batches shipped to amazon warehouse, so that we can help.
Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router. After power on 2 minutes，go to pi-star/admin/configure. Php. Note not compatible with baofeng uv-5r, please read the product manual or feel free to contact us, 5x, etc uv series, Baofeng RD-5R, 5R Plus, BF series.
AURSINC #ad - Wifi ssid need the 2. 4ghz ssid as the pi zero w doesn't support 5. 8ghz. And wifi will not work with wep, make sure your WiFi Password Type is WPA. Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router.
Note if you encounter that the device cannot connect to network after setup, please email us, we will address your issue asap. Easy charging free micro usb charging cable included, charged with power bank or connect to laptop or computer. If you receive a old firmware device and there's update trouble, please do contact us, the problem has been solved, so that we can help.
Not compatible with baofeng uv-5r, 5r+, etc uv series, 5R Plus, Baofeng RD-5R, please read the product manual or contact us, BF series. Our test is in dmr mode ，if you want to change the working mode, you need to configure it as needed Working mode parameters. Note: when you flash the tf card with new version software, no need to download again. Support: c4fm ysf nxdn dstar p25 dmr and default work with UHF. Firmware 4.
AURSINC #ad - Work with rasberry pi: mounts cleanly on current Raspberry Pi including the Pi Zero, NOT compatible with Rasberry Pi 4. Modem select: stm32-dvm/mmdvm_hs-raspberry pi HatGPIO or any other GPIO board.
Update new fw: pi-star / expert / ssh access / user :pi-star pass:raspberry then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1, BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
GOOZEEZOO #ad - If you encounter any problems while using the product, please feel free to consult us and we will reply to you within 24 hours. Widely compatible: supports DMR, P-25, D-Star and System Fusion.
Update new fw: pi-star / ssh access / expert / user :pi-star pass:raspberry then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1, BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
Brands #ad - The firmware is pre-loaded. 73. Best customer services: fully-assembled. Power supply: mobile charger or a USB cable connected to your computer or laptop.
Need the 2. 4ghz ssid as the Pi Zero W. Doesn't support 5. 8ghz. Setup: set the same freq as radio mobile, for example: 433. 550000mhz. Contact us if any question, we will reply within 6 hours.
AURSINC #ad - Widely compatible: supports dmr brandmeister, system Fusion FCS, D-Star, P25, YSFReflector, NXDN, Pocsage networks. All accessories included. Easy to use: very easy to use, works out of the box. Web interface for configuration and monitoring. Try less than 5 times will work.
Runs fully embedded software, works without a computer. No additional hardware required, running on an openwrt operating system. Any other problem just Press WPS key to factory reset. Note: connect the power of usb, only pwr led on, if rf board’s led did not flash all on, disconnect the Power and Connect Again Until All LED Flash.
Power up boot time: under 30s; runs without an sd card; usb/web update firmware; usb console function; Simple Setting Page; Simple Log View Function; System Firmware Size: Max 32M; Running Current: Under 300ma @5V; Factory Reset WPS button. The hotspot will also work mobile in your vehicle if you tether it to your mobile phone network. Latest feature: tf is not required for this hotspot, the main board is the latest design by our team -- jumbospot. No tf card, bulky Windows software or failing SD cards.
AURSINC #ad - Update new fw: pi-star / expert / ssh access / user :pi-star pass:raspberry then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1, BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
Widely compatible: supports DMR, P-25, D-Star and System Fusion. Modem select: stm32-dvm/mmdvm_hs-raspberry pi HatGPIO or any other GPIO board. Work with rasberry pi: mounts cleanly on current Raspberry Pi including the Pi Zero, NOT compatible with Rasberry Pi 4.
GOOZEEZOO #ad - Support mmdvm mode dmr / ysf / p25 / dstar / nxdN / POCSAG. Support online upgrade, user-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
If the raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
Hotspot board support raspberry pi 3b, orange pi, compatible with NanoPi NEO, Pi ZERO, 3b +, compatible with BlueDV requires USBtoTTL or Bluetooth model. Mmdvm board saves electricity, high quality tcxo, stable, low ber. If you encounter any problems while using the product, please feel free to consult us and we will reply to you within 24 hours.
Mokxihit #ad - Upgraded network: support two networking methods, support wifi wireless connection and wired connection to the router directly. Support both Simplex and Duplex mode. Frequency: support 430~450Mhz, UHF. Support:dmr, ysf, d-STAR, P25.
SDRGEEK #ad - Basic setup: set the same freq as radio mobile, password:raspberry, for example: 433. 550000mhz dmr, wifi ssid:pi-star, Need the 2. 4ghz ssid as the pi zero W doesn't support 5. 8ghz. Power supply: mobile charger or a usb cable connected to your computer or laptop.
In single mode support both Uhf and Vhf. Modem select: stm32_hs_gpio;the upper part is tx, support slot1, slot2. Supports UHF/VHF. Frequency: uhf 433-900mhz, vhf 144-220 MHz. Mmdvm duplex version v1.
High-performance 32-bit arm processor, up to 10mW RF power, each piece has been fully tested. We have done some setting for pi-star in the TF card. Note: tx =0, rx frequency，tx, RX frequency had better 10M or more apart. Mmdvm hotspot is a fully-assembled device, the lower is rx antenna. Set tx frequency, rx=0 Mmdvm duplex hotspot suits for raspberry pi 3, p25, ysf and work with uhf, raspberry pi zero w, but noT compatible with Rasberry Pi 4.
1. AURSINC
#adMMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero 2 W with Firmware V4.1.5 UHF VHF | Ethernet Cable | Supports C4FM YSF NXDN DSTAR P25 DMR
#adWifi ssid need the 2. 4ghz ssid as the pi zero w doesn't support 5. 8ghz. And wifi will not work with wep, make sure your WiFi Password Type is WPA. Firmware 4. 1. 5 in the latest batches shipped to amazon warehouse, so that we can help.
More information #ad
Easy set up preload sofeware pi-star on tf card, do not need to set RXOFFSET and TXOFFSET, vhf:144-146 this is upgraded version, no need to download again. Radio frequency: uhf:430-440, they're default 0 Support: c4fm ysf nxdn dstar p25 dmr and default work with UHF. Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router. After power on 2 minutes，go to pi-star/admin/configure. Php. Note not compatible with baofeng uv-5r, please read the product manual or feel free to contact us, 5x, etc uv series, Baofeng RD-5R, 5R Plus, BF series.
| Brand | AURSINC #ad |
| Manufacturer | AURSINC #ad |
| Height | 2 inches |
| Length | 4 inches |
| Weight | 0.28 Pounds |
| Width | 4 inches |
More information #ad
2. AURSINC
#adAURSINC MMDVM Hotspot Spot Radio Station WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero W with Firmware V4.1.5 UHF Supports C4FM YSF POCSAG NXDN DSTAR P25 DMR
#adNote if you encounter that the device cannot connect to network after setup, please email us, we will address your issue asap. Easy charging free micro usb charging cable included, charged with power bank or connect to laptop or computer. If you receive a old firmware device and there's update trouble, please do contact us, the problem has been solved, so that we can help.
More information #ad
After power on 2 minutes，goto http://pi-star/admin/configure. Php. Radio frequency: uhf:430-440 this is upgraded version, please do not copy on the TF card directly, do not need to set RXOFFSET and TXOFFSET, use a write in tool to write the software on TF card. Not compatible with baofeng uv-5r, 5r+, etc uv series, 5R Plus, Baofeng RD-5R, please read the product manual or contact us, BF series. Our test is in dmr mode ，if you want to change the working mode, you need to configure it as needed Working mode parameters. Note: when you flash the tf card with new version software, no need to download again. Support: c4fm ysf nxdn dstar p25 dmr and default work with UHF. Firmware 4.
| Brand | AURSINC #ad |
| Manufacturer | AURSINC #ad |
| Height | 3.94 inches |
| Length | 4.33 Inches |
| Weight | 0.22 Pounds |
| Width | 1.61 Inches |
| Part Number | 202007 |
| Model | MMDVM HOTSPOT STATION |
| Warranty | 30days |
More information #ad
3. AURSINC
#adAURSINC MMDVM Duplex Hotspot Module Dual Hat Mini Size Support P25 DMR YSF NXDN DMR for Raspberry pi with USB Port Without OLED
#adUpdate new fw: pi-star / expert / ssh access / user :pi-star pass:raspberry then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1, BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
More information #ad
Frequency: radio frequency : freq:144-148, 842-950 note: tx =0, 219-225, main band 420-475, rx=0. Widely compatible: supports DMR, P-25, D-Star and System Fusion. High performace: 32-bit arm processor, up to 10mW RF power, fully tested every piece.| Brand | AURSINC #ad |
| Manufacturer | AURSINC #ad |
| Part Number | AUR-001 |
| Model | AUR-001 |
More information #ad
4. GOOZEEZOO
#adGOOZEEZOO MMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for Raspberry pi with USB Port with OLED
#adUpdate new fw: pi-star / ssh access / expert / user :pi-star pass:raspberry then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1, BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
More information #ad
Modem select: stm32-dvm/mmdvm_hs-raspberry pi HatGPIO or any other GPIO board. High performace: 32-bit arm processor, up to 10mW RF power, fully tested every piece. If the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat ;. Frequency: radio frequency : freq:144-148, 219-225, 842-950 note: tx =0, main band 420-475, rx=0.| Brand | GOOZEEZOO #ad |
| Manufacturer | GOOZEEZOO #ad |
| Part Number | 2020 |
| Model | 2020 |
| Warranty | 1 year manufacturer |
More information #ad
5. Brands
#adMMDVM Hotspot Spot Assembled Radio Station OLED Antenna WiFi Digital Voice Modem P25 DMR YSF C4FM Raspberry Pie Pi
#adNeed the 2. 4ghz ssid as the Pi Zero W. Doesn't support 5. 8ghz. Setup: set the same freq as radio mobile, for example: 433. 550000mhz. Contact us if any question, we will reply within 6 hours.
More information #ad
Dmr wifi ssid:pi-star, PASSWORD:raspberry. Mmdvm hotspot supports d-star dmr ysf p25 nxdn pocsag, enables the different mode of digital two way radio to communicate with each other YSF2DMR / YSF2NXDN / YSF2P25 / DMR2YSF / DMR2NXDN and works great with UHF. Hotspot size: 2. 8 x 1. 3 x 09” inch.| Brand | Brands #ad |
| Manufacturer | Brands #ad |
| Height | 2.8 inches |
| Length | 1.3 inches |
| Width | 0.9 inches |
More information #ad
6. AURSINC
#adAURSINC Latest OSTAR MMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work UHF VHF Dual Band | Support DMR D-Star System Fusion FCS YSFReflector P25 NXDN Pocsage Networks
#adRuns fully embedded software, works without a computer. No additional hardware required, running on an openwrt operating system. Any other problem just Press WPS key to factory reset. Note: connect the power of usb, only pwr led on, if rf board’s led did not flash all on, disconnect the Power and Connect Again Until All LED Flash.
More information #ad
Free micro usb charging cable included, charged with power bank or connect to laptop or computer. Power saving and safe: usb powered, low energy consumption, 10mw rf output. Power up boot time: under 30s; runs without an sd card; usb/web update firmware; usb console function; Simple Setting Page; Simple Log View Function; System Firmware Size: Max 32M; Running Current: Under 300ma @5V; Factory Reset WPS button. The hotspot will also work mobile in your vehicle if you tether it to your mobile phone network. Latest feature: tf is not required for this hotspot, the main board is the latest design by our team -- jumbospot. No tf card, bulky Windows software or failing SD cards.
| Brand | AURSINC #ad |
| Manufacturer | AURSINC #ad |
| Height | 0.7 inches |
| Length | 2 inches |
| Width | 0.7 inches |
| Part Number | OSTAR MMDVM |
| Model | OSTAR MMDVM |
| Warranty | 1 year manufacturer |
More information #ad
7. AURSINC
#adMMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for Raspberry pi with USB Port with OLED
#adWidely compatible: supports DMR, P-25, D-Star and System Fusion. Modem select: stm32-dvm/mmdvm_hs-raspberry pi HatGPIO or any other GPIO board. Work with rasberry pi: mounts cleanly on current Raspberry Pi including the Pi Zero, NOT compatible with Rasberry Pi 4.
More information #ad
If the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat ; HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece. Frequency: radio frequency : freq:144-148, main band 420-475, 842-950 note: tx =0, 219-225, rx=0.| Brand | AURSINC #ad |
| Manufacturer | AURSINC #ad |
| Part Number | 2020 |
| Model | 2020 |
More information #ad
8. GOOZEEZOO
#adPi 3 Board, GOOZEEZOO MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W
#adIf the raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
More information #ad
Mmdvm hotspot board supports uhf vhf, 420mhz-475mhz, 842mhz-950mhz depending on ADF7021 and TCXO, frequency range: 144mhz-148mhz, HAT firmware amateur radio brand license restrictions. Hotspot board support raspberry pi 3b, orange pi, compatible with NanoPi NEO, Pi ZERO, 3b +, compatible with BlueDV requires USBtoTTL or Bluetooth model. Mmdvm board saves electricity, high quality tcxo, stable, low ber. If you encounter any problems while using the product, please feel free to consult us and we will reply to you within 24 hours.
| Brand | GOOZEEZOO #ad |
| Manufacturer | GOOZEEZOO #ad |
| Height | 0.4 inches |
| Length | 2.56 inches |
| Width | 1.2 inches |
| Warranty | 1 year manufacturer |
More information #ad
9. Mokxihit
#adUpgraded Duplex DMR Hotspot WLAN Ethernet Port Assembled Radio Station WiFi Digital Voice Modem Support DMR Dstar YSF P25 Fusion Antenna Raspberry Pi Model 2B Two Colors OLED 2 TimeSlots
#adMore information #ad
Suit for raspberry pi model 2b. Two time slots: support receive in one Frequency and transfer in another frequency. Best service: if need help, contact us, we will reply within 6 hours. Power supply: 5v, mobile charger or a usb cable connected to your computer or laptop.| Brand | Mokxihit #ad |
| Manufacturer | IWatson Electronics #ad |
| Warranty | 2 |
More information #ad
10. SDRGEEK
#adMMDVM Duplex Hotspot Board, 0.96 OLED and Metal Housing Mounted, Multi-Mode Digital Voice Modem Support P25 DMR YSF NXDN Slot 1 + Slot 2 for Raspberry Pi Zero,with 8G TF Card
#adIn single mode support both Uhf and Vhf. Modem select: stm32_hs_gpio;the upper part is tx, support slot1, slot2. Supports UHF/VHF. Frequency: uhf 433-900mhz, vhf 144-220 MHz. Mmdvm duplex version v1.
More information #ad
52, this pcb uses the mmdvm_hs. The hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network. Support:d-star, dmr, enables the different mode of digital two way radio to communicate with each other. High-performance 32-bit arm processor, up to 10mW RF power, each piece has been fully tested. We have done some setting for pi-star in the TF card. Note: tx =0, rx frequency，tx, RX frequency had better 10M or more apart. Mmdvm hotspot is a fully-assembled device, the lower is rx antenna. Set tx frequency, rx=0 Mmdvm duplex hotspot suits for raspberry pi 3, p25, ysf and work with uhf, raspberry pi zero w, but noT compatible with Rasberry Pi 4.
| Brand | SDRGEEK #ad |
| Manufacturer | SDRGEEK #ad |
| Height | 2.36 inches |
| Length | 3.74 inches |
| Width | 3.27 inches |
| Warranty | 1 YEAR |
More information #ad
