Starrett B565D Brass Drive Pin Punch, 4″ Overall Length, 7/8″ Pin Length, 5/32″ Pin Diameter

The company, is headquartered in Athol, founded in 1880, MA. It has a round shank, which is knurled for grip. Pin punches are used to insert or knock out rivets and pins in assemblies. They have a metal shank on one end and a metal pin driver on the other, and are typically tapped with a hammer. The L. S. The punch is made from brass, which is softer than hardened steel and better for use on delicate materials.

Brass drive pin punch with 4" overall length, 7/8" pin length, and 5/32" pin diameter pushes pins and rivets into or out of a workpiece. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Brass is softer than hardened steel and better for use on delicate materials.

Round shank is knurled for grip. The starrett b565d brass drive pin punch has a 4" overall length with a 7/8" pin length and 5/32" pin diameter to push pins and rivets into or out of a workpiece.

---

Starrett B565H Brass Drive Pin Punch, 4" Overall Length, 1" Pin Length, 5/16" Pin Diameter

Brass drive pin punch with 4" overall length, 1" pin length, and 5/16" pin diameter pushes pins and rivets into or out of a workpiece. They have a metal shank on one end and a metal pin driver on the other, and are typically tapped with a hammer. The L. S. It has a round shank, which is knurled for grip. Pin punches are used to insert or knock out rivets and pins in assemblies.

Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Round shank is knurled for grip. The punch is made from brass, which is softer than hardened steel and better for use on delicate materials. Brass is softer than hardened steel and better for use on delicate materials.

The company, is headquartered in Athol, founded in 1880, MA. The starrett b565h brass drive pin punch has a 4" overall length with a 1" pin length and 5/16" pin diameter to push pins and rivets into or out of a workpiece.


Similar products

---

Starrett B565F Brass Drive Pin Punch, 4" Overall Length, 1-3/64" Pin Length, 7/32" Pin Diameter

Round shank is knurled for grip. They have a metal shank on one end and a metal pin driver on the other, and are typically tapped with a hammer. The L. S. The punch is made from brass, which is softer than hardened steel and better for use on delicate materials. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products.

Brass is softer than hardened steel and better for use on delicate materials. Round shank is knurled for grip. Brass drive pin punch with 4" overall length, 1-3/64" pin length, and 7/32" pin diameter pushes pins and rivets into or out of a workpiece. The starrett b565f brass drive pin punch has a 4" overall length with a 1-3/64" pin length and 7/32" pin diameter to push pins and rivets into or out of a workpiece.

Brass drive pin punch with 4" overall length, 1" pin length, and 5/16" pin diameter pushes pins and rivets into or out of a workpiece. Brass is softer than hardened steel and better for use on delicate materials. It has a round shank, which is knurled for grip. Pin punches are used to insert or knock out rivets and pins in assemblies.

The company, founded in 1880, is headquartered in Athol, MA.


Similar products

---

Nylon, Multipurpose - Vise Jaws - Use on Any Metal Vise, Magnetic Reversible Pads, Clamps Flat or Round Products - Available in 4" or 6" 2 Sets in 1

Australian made from recycled nylon that keeps the Environment in Mind Certification complies with requirements of relevant USA standards. Brass drive pin punch with 4" overall length, 1" pin length, and 5/16" pin diameter pushes pins and rivets into or out of a workpiece. What you can expect from our NYLON VISE JAWS.

Complete satisfaction and Knowledge That this product will last a life time and you will never have to buy another. Protect your working piece Flat or Round from the Metal on your Vise. For the best quality multipurpose visE JAWS click the Add to Cart button at the top of this page. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material.

Gunsmithing, bicycle, fishing, engineering, Carpentry, Golf, Locksmith AN fitting, Toolmaking, jewellery, Automotive, Plumbing. Brass is softer than hardened steel and better for use on delicate materials. Kiu products are backed by a Full 100% Replacement or Money Back Guarantee. The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE.

One side flat, v-pads, prismatic, protector for Barrels, one side multi-groove, woodwork, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Applications commonly used in.


Similar products

---

Starrett B248E Extended Length Brass Drive Pin Punch, 8" Overall Length, 3-1/2" Pin Length, 3/8" Pin Diameter

The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, protector for Barrels, woodwork, one side multi-groove, Prismatic, v-pads, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. It has a round steel shank, which is knurled for grip.

Pin punches are used to insert or knock out rivets and pins in assemblies. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. Round steel shank is knurled for grip. Round shank is knurled for grip. Brass drive pin punch with 4" overall length, 1-3/64" pin length, and 7/32" pin diameter pushes pins and rivets into or out of a workpiece.

Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Round shank is knurled for grip. Extra-long 3-1/2" pin length provides greater reach in recessed areas, making it suitable for machine shop and motor service work. The company, founded in 1880, is headquartered in Athol, MA.

Brass drive pin punch with 4" overall length, 1" pin length, and 5/16" pin diameter pushes pins and rivets into or out of a workpiece. Brass pin is softer than hardened steel and better for use on delicate materials.


Similar products

---

AmeriGlo Tritium I-Dot Green with Orange Outline Sight Set, Smith and Wesson, M and P Shield

Brass drive pin punch with 4" overall length, 1" pin length, and 5/16" pin diameter pushes pins and rivets into or out of a workpiece. Brass is softer than hardened steel and better for use on delicate materials. Sight sets with green tritium lamp front, one tritium lamp rear for Smith & Wesson M&P Models.

Round shank is knurled for grip. Extra-long 3-1/2" pin length provides greater reach in recessed areas, making it suitable for machine shop and motor service work. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. Brass drive pin punch with 4" overall length, 1-3/64" pin length, and 7/32" pin diameter pushes pins and rivets into or out of a workpiece.

Brass pin is softer than hardened steel and better for use on delicate materials. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. Round shank is knurled for grip. Rear tritium lamp is centered, below rear sight notch. The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE.

One side flat, prismatic, one side multi-groove, protector for Barrels, woodwork, v-pads, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied.


Similar products

---

XS Sight Systems SW-0024S-3 Big Dot Tritium Express Front Sight with S&W M&P Shield

Features: - larger front sight improves the speed of front sight acquisition - white dot reflects light for best visibility in low light - express rear prevents obstruction of front sight when moving - Snag-free design for comfortable carry - Green Tritium Specifications: - Sight Set - Fits: S&W M&P Shield - File to fit installation no sight pusher tools - Front Sight: White Big Dot with Green Tritium Center - Rear Sight: White Stripe Non-Tritium - Material: Blued Steel - Finish: Matte Black - Includes: Hardware Kit Brass drive pin punch with 4" overall length, 1" pin length, and 5/16" pin diameter pushes pins and rivets into or out of a workpiece.

The xs sights dxw big dot are defensive night sights for encounters under any light condition. Brass drive pin punch with 8" overall length and 3/8" pin diameter pushes pins and rivets into or out of a workpiece. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press.

Round shank is knurled for grip. The front sight has a large, easy-to-see white ring surrounding the tritium dot. Ameriglo s&w m&p shield i-dot O/G St SW-245. White dot reflects light for best visibility in low light. The express rear sight features a vertical white stripe at the base of the shallow V. The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE.




Similar products

---

Starrett B565G Brass Drive Pin Punch, 4" Overall Length, 1" Pin Length, 1/4" Pin Diameter

They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, one side multi-groove, Prismatic, protector for Barrels, woodwork, v-pads, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied.

Ameriglo s&w m&p shield i-dot O/G St SW-245. Brass drive pin punch with 4" overall length, 1" pin length, and 1/4" pin diameter pushes pins and rivets into or out of a workpiece. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Brass is softer than hardened steel and better for use on delicate materials.

Brass pin is softer than hardened steel and better for use on delicate materials. Brass drive pin punch with 8" overall length and 3/8" pin diameter pushes pins and rivets into or out of a workpiece. Express rear prevents obstruction of front sight when moving. Round shank is knurled for grip. White dot reflects light for best visibility in low light.

Brass drive pin punch with 4" overall length, 1-3/64" pin length, and 7/32" pin diameter pushes pins and rivets into or out of a workpiece.


Similar products

---

2 Pc. Tool Set - Fixxxer Front Sight Installation Hex Tool & Armorers Disassembly Tool for Glock

Brass pin is softer than hardened steel and better for use on delicate materials. Round shank is knurled for grip. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. Brass is softer than hardened steel and better for use on delicate materials. Contains: 1 armorers disassembly Tool For Glock - Aids in the removal of pins and base plates on Glock pistols.

The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE. One side flat, v-pads, woodwork, Prismatic, protector for Barrels, one side multi-groove, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. A must have tool set for any Glock owner.

Fixxxer Brand. Or glock Ges. M. B. H. Brass is softer than hardened steel and better for use on delicate materials. Extra-long 3-1/2" pin length provides greater reach in recessed areas, making it suitable for machine shop and motor service work. You will appreciate the Quality and Value of Fixxxer products.


Similar products

---

Starrett B565E Brass Drive Pin Punch, 4" Overall Length, 1-3/64" Pin Length, 3/16" Pin Diameter

Round shank is knurled for grip. Round shank is knurled for grip. The starrett b565e brass drive pin punch has a 4" overall length with a 1-3/64" pin length and 3/16" pin diameter to push pins and rivets into or out of a workpiece. Extra-long 3-1/2" pin length provides greater reach in recessed areas, making it suitable for machine shop and motor service work.

Brass drive pin punch with 4" overall length, 1" pin length, and 1/4" pin diameter pushes pins and rivets into or out of a workpiece. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press.

Brass is softer than hardened steel and better for use on delicate materials. Larger front sight improves the speed of front sight acquisition. Brand new & High Quality Material! Brass is softer than hardened steel and better for use on delicate materials. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material.

The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE. One side flat, protector for Barrels, woodwork, one side multi-groove, Prismatic, v-pads, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied.


Similar products

---

Trijicon S&W M&P Shield Night Sights Set Green Front & Rear Lamps

Protective aluminum cylinders: Contains and protects the tritium gas filled lamps from heavy recoil and harsh cleaning solvents. Brass drive pin punch with 8" overall length and 3/8" pin diameter pushes pins and rivets into or out of a workpiece. Professional installation recommended. Brass pin is softer than hardened steel and better for use on delicate materials.

White dot reflects light for best visibility in low light. Brass drive pin punch with 4" overall length, 1" pin length, and 1/4" pin diameter pushes pins and rivets into or out of a workpiece. The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE. One side flat, woodwork, protector for Barrels, Prismatic, v-pads, one side multi-groove, mechanics.

Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Express rear prevents obstruction of front sight when moving. Tritium-filled glass lamp provides superior illumination in no light or low light conditions. Brass drive pin punch with 4" overall length, 1-3/64" pin length, and 3/16" pin diameter pushes pins and rivets into or out of a workpiece.

Extra-long 3-1/2" pin length provides greater reach in recessed areas, making it suitable for machine shop and motor service work. Round shank is knurled for grip.


Similar products