10-24 x 1″ Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 by Fastenere


Lightning Stainless - The internal hex drive, has a hexagonal slot that requires an Allen key driver, also known as a hex-socket drive, also known as a hex key or Allen wrench. Head diameter 0361". The 18-8 stainless steel socket cap screw has a plain finish and a button head with an internal hex drive. The material may be slightly magnetic.

Socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance. Head height 0101". The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

10-24 x 1" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 by Fastenere - . Thread diameter 0190". The button head is round with a low profile and short vertical sides, and is suitable for light duty applications. Allen hex drive Size 1/8". These screws are available with a variety of head shapes, and drive styles, which determine how the screw interacts with the mating surface, which determine the type of tool required to install the screw.

More information about Lightning Stainless

10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 by Fastenere


Fastenere - Hex socket Drive 3/8". For example, bolts, fasteners, carroll smith carroll smith's nuts, and Plumbing Handbook notes that the nylon insert is not damaged by installation and therefore they can be reused many times, and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification.

The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. It is a nut with a nylon collar insert that resists turning. A nyloc nut, also referred to as a nylon-insert lock nut, or elastic stop nut, polymer-insert lock nut, is a kind of locknut. For use with an externally threaded item that measures 0

10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 by Fastenere - 190 inch and has 24 threads per inch. Width measured From Flat to Flat 3/8". The plastic insert is placed at the end of the nut, and its inner diameter ID is slightly smaller than the major diameter of the screw. The nylon insert locks the nut by friction against the screw under the applied radial compressive force.

Nyloc nuts retain their locking ability up to 250 °F 121 °C. However, an air force Technical Order requires replacement of self-locking nuts in critical areas. Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

More information about Fastenere


Similar products



10-24 x 3/4" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 by Fastenere


Lightning Stainless - The internal hex drive, also known as a hex-socket drive, has a hexagonal slot that requires an Allen key driver, also known as a hex key or Allen wrench. The material may be slightly magnetic. Head diameter 0361". Hex socket Drive 3/8". 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

. Socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance. The button head is round with a low profile and short vertical sides, and is suitable for light duty applications. These screws are available with a variety of head shapes, and drive styles, which determine how the screw interacts with the mating surface, which determine the type of tool required to install the screw.

For use with an externally threaded item that measures 0190 inch and has 24 threads per inch. Width measured From Flat to Flat 3/8". The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The 18-8 stainless steel socket cap screw has a plain finish and a button head with an internal hex drive.

10-24 x 3/4" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 by Fastenere - Allen hex drive Size 1/8". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

More information about Lightning Stainless


Similar products



10-24 x 1/2" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 by Fastenere


Lightning Stainless - Socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Head diameter 0361". Head height 0101". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

Thread diameter 0190". The material may be slightly magnetic. Hex socket Drive 3/8". For use with an externally threaded item that measures 0190 inch and has 24 threads per inch. Width measured From Flat to Flat 3/8". These screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of tool required to install the screw.

10-24 x 1/2" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50 by Fastenere - Height 15/64". The internal hex drive, also known as a hex-socket drive, has a hexagonal slot that requires an Allen key driver, also known as a hex key or Allen wrench.

More information about Lightning Stainless


Similar products



1/4-20 x 1" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere


Lightning Stainless - 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Thread diameter 0250". The button head is round with a low profile and short vertical sides, and is suitable for light duty applications. The material may be slightly magnetic. Hex socket Drive 3/8". Head height 0

101". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance. Thread diameter 0

1/4-20 x 1" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere - 190". Head diameter 0437". Fastenere brand stainless steel fasteners are backed by Fastenere's Industry leading customer service and Guaranteed Satisfaction. The internal hex drive, has a hexagonal slot that requires an Allen key driver, also known as a hex-socket drive, also known as a hex key or Allen wrench.

Head diameter 0361". The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. These screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of tool required to install the screw.

More information about Lightning Stainless


Similar products



Astro Pneumatic Tool RN1024#10-24 Steel Rivet Nuts 100 Piece


Astro Tools RN1024 - Head height 0132". Head dia: 10mm, head thickness: 1mm. 100 piece pack of high quality zinc plated knurled steel Rivet nuts for use with Astro's prn Series Pneumatic Rivet nut setting guns as well as Astro 1427 and 1442 handheld Rivet nut Setters. For use with an externally threaded item that measures 0190 inch and has 24 threads per inch.

Width measured From Flat to Flat 3/8". Head diameter 0361". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

Astro Pneumatic Tool RN1024#10-24 Steel Rivet Nuts 100 Piece - Thread diameter 0190". Height 15/64". Allen hex drive Size 1/8". Also compatible with standard Rivet nut setting tools. These fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come. Zinc plated knurled steel rivet nut. Thread pitch: #10 - 24.

More information about Astro Tools RN1024


Similar products



E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #10-24 Internal Threads, 0.394" Length Pack of 50


E-Z LOK 901024-10 - Head height 0101". Fastenere brand stainless steel fasteners are backed by Fastenere's Industry leading customer service and Guaranteed Satisfaction. Allen hex drive Size 1/8". 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Thread diameter 0190". These fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come.

Zinc plated knurled steel rivet nut. Allen hex drive Size 5/32". Ideal for use in materials such as pine, composition board, and MDF, plywood, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. Height 15/64". Provides a strong Machine Thread In Soft Woods. Allen hex drive Size 1/8".

E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #10-24 Internal Threads, 0.394" Length Pack of 50 - Head diameter 0437". Head diameter 0361". E-z lok hex drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

More information about E-Z LOK 901024-10


Similar products



40pcs 10-24 Rivet Nuts Threaded Insert Nutsert Rivnuts Stainless Steel 10-24UNC


Woopais - Height 15/64". 40pcs 10-24 threaded inserts stainless steel rivet nuts nutsert. Thread pitch: 10-24, flat head rivet nuts. Head height: 0045", head diameter: 0394". Grip range:0020"-0100"; body diameter:0272", application Hole Size:0273"-0278". Total length: 0526""; installed Length: 0330". These fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come.

Zinc plated knurled steel rivet nut. Head dia: 10mm, head thickness: 1mm. Ideal for use in pine, Plywood, Composition Board, and MDF. Designed for use in applications such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates. Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool.

40pcs 10-24 Rivet Nuts Threaded Insert Nutsert Rivnuts Stainless Steel 10-24UNC - Tapered external Threads Resist Pull-Out Caused By Vibration. Once installed, no finishing work is required on the RIVNUT fastener. Outside diameter: 6. 9mm, length: 13mm.

More information about Woopais


Similar products



10-24 x 1-1/2" Button Head Socket Cap Screws 18-8 Stainless Steel, Quantity 50, Allen Hex Drive by Fastenere


Lightning Stainless - Allen hex drive Size 1/8". Head height 0101". Head diameter 0437". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.

Thread diameter 0190". Head dia: 10mm, head thickness: 1mm. These fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come. Zinc plated knurled steel rivet nut. Head height 0101". Head diameter 0361". The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments.

10-24 x 1-1/2" Button Head Socket Cap Screws 18-8 Stainless Steel, Quantity 50, Allen Hex Drive by Fastenere - The internal hex drive, also known as a hex-socket drive, has a hexagonal slot that requires an Allen key driver, also known as a hex key or Allen wrench. Head diameter 0361". Allen hex drive Size 1/8". 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

More information about Lightning Stainless


Similar products



1/4-20 x 3/4" Button Head Socket Cap Screws 18-8 Stainless Steel, Quantity 25, Allen Hex Drive by Fastenere


Lightning Stainless - The material may be slightly magnetic. Head diameter 0437". Fastenere brand stainless steel fasteners are backed by Fastenere's Industry leading customer service and Guaranteed Satisfaction. These fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come. Zinc plated knurled steel rivet nut.

Head diameter 0361". Height 15/64". 40pcs 10-24 threaded inserts stainless steel rivet nuts nutsert. Thread pitch: 10-24, flat head rivet nuts. Head height: 0045", head diameter: 0394". Grip range:0020"-0100"; body diameter:0272", application Hole Size:0273"-0278". Total length: 0526""; installed Length: 0330".

More information about Lightning Stainless


Similar products



Astro Pneumatic Tool RN14 1/4"-20 Steel Rivet Nuts 100 Piece


Astro Tools RN14 - Head height 0132". Fastenere brand nylon lock nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance. Thread diameter 0

190". 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Thread diameter 0250". Head height 0101". Allen hex drive Size 1/8". Head diameter 0361". Head height 0101". Head diameter 0361". These fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come.

Astro Pneumatic Tool RN14 1/4"-20 Steel Rivet Nuts 100 Piece - Zinc plated knurled steel rivet nut. Outside diameter: 6. 9mm, length: 13mm.

More information about Astro Tools RN14


Similar products